El analizador de estructuras de acero NOVOTEST KRC-M2 está diseñado para medir la fuerza coercitiva de productos metálicos de acuerdo con IEC 60404-7 y se utiliza para pruebas no destructivas de tratamientos químico-térmicos, térmicos y termomecánicos, evaluación de propiedades mecánicas y tensiones residuales.
El analizador de estructuras de acero se utiliza para determinar las propiedades mecánicas y medir la dureza de los productos metálicos, así como para medir productos de aleaciones ferromagnéticas en presencia de correlaciones entre los parámetros estudiados. Además, el dispositivo se utiliza para probar la capa superficial de material ferromagnético para clasificar el metal en calidades de acero.
KRC-M2 tiene un transmisor de electroimán con sensor Hall integrado y puntas de polo extraíbles.
El principio de funcionamiento del dispositivo consiste en lo siguiente: inicialmente se realiza una magnetización del área del objeto probado y luego su posterior desmagnetización progresiva por el aumento del campo. A continuación, es la fijación de la intensidad del campo magnético de acuerdo con la fuerza coercitiva del material del objeto probado y la medición de la amplitud de las señales del sensor Hall.
El área principal de uso del analizador de estructuras de acero NOVOTEST KRC-M2 – es analizar el estado de tensión-deformación y la vida residual de tuberías, elevadores, grúas y elevadores, recipientes a presión, cables de acero de puentes, también se utiliza en industrias de ingeniería y metalúrgicas.
El analizador de estructuras de acero NOVOTEST KRC-M2 está diseñado para medir la fuerza coercitiva de productos metálicos de acuerdo con IEC 60404-7 y se utiliza para pruebas no destructivas de tratamientos químico-térmicos, térmicos y termomecánicos, evaluación de propiedades mecánicas y tensiones residuales.
El analizador de estructuras de acero se utiliza para determinar las propiedades mecánicas y medir la dureza de los productos metálicos, así como para medir productos de aleaciones ferromagnéticas en presencia de correlaciones entre los parámetros estudiados. Además, el dispositivo se utiliza para probar la capa superficial de material ferromagnético para clasificar el metal en calidades de acero.
KRC-M2 tiene un transmisor de electroimán con sensor Hall integrado y puntas de polo extraíbles.
El principio de funcionamiento del dispositivo consiste en lo siguiente: inicialmente se realiza una magnetización del área del objeto probado y luego su posterior desmagnetización progresiva por el aumento del campo. A continuación, es la fijación de la intensidad del campo magnético de acuerdo con la fuerza coercitiva del material del objeto probado y la medición de la amplitud de las señales del sensor Hall.
El área principal de uso del analizador de estructuras de acero NOVOTEST KRC-M2 – es analizar el estado de tensión-deformación y la vida residual de tuberías, elevadores, grúas y elevadores, recipientes a presión, cables de acero de puentes, también se utiliza en industrias de ingeniería y metalúrgicas.
Capacidad para ingresar escalas adicionales y materiales adicionales para la calibración
Modo de calibración de básculas básicas y adicionales.
Ajuste el brillo de la pantalla, audio, selección de idioma
Posibilidad de guardar calibraciones de copias de seguridad en la memoria interna del dispositivo
Sensores inteligentes con memoria integrada de calibraciones.
Steel Structure Analyzer NOVOTEST KRC-M2 is designed for measuring coercive force of metal products in accordance with IEC 60404-7 and is used for non-destructive testing of chemical-thermal, thermal and thermomechanical treatments, evaluation of mechanical properties and residual stresses.
Steel structure analyzer is used for determination of mechanical properties, and measurement the hardness of metal products, as well as measurements of products of ferromagnetic alloys in the presence of correlations between the studied parameters. In addition, the device is used for testing the surface layer of ferromagnetic material for grading the metal in steel grades.
KRC-M2 has an electromagnet transmitter with integrated Hall sensor and removable pole tips.
The operation principle of the device consist of following: initially is performed a magnetization of area of the tested object and after that its subsequent progressive demagnetization by the increasing of the field. Next, it is the fixation of the intensity of magnetic field in accordance with the coercive force of material of tested object and measurement the amplitude of signals from the Hall sensor.
The main area of using the Steel Structure Analyzer NOVOTEST KRC-M2 – is analys the stress-strain state and residual life of pipelines, elevators, cranes and lifts, pressure vessels, steel cables of bridges also it used in engineering and metallurgical industries.
Steel Structure Analyzer NOVOTEST KRC-M2 is designed for measuring coercive force of metal products in accordance with IEC 60404-7 and is used for non-destructive testing of chemical-thermal, thermal and thermomechanical treatments, evaluation of mechanical properties and residual stresses.
Steel structure analyzer is used for determination of mechanical properties, and measurement the hardness of metal products, as well as measurements of products of ferromagnetic alloys in the presence of correlations between the studied parameters. In addition, the device is used for testing the surface layer of ferromagnetic material for grading the metal in steel grades.
KRC-M2 has an electromagnet transmitter with integrated Hall sensor and removable pole tips.
The operation principle of the device consist of following: initially is performed a magnetization of area of the tested object and after that its subsequent progressive demagnetization by the increasing of the field. Next, it is the fixation of the intensity of magnetic field in accordance with the coercive force of material of tested object and measurement the amplitude of signals from the Hall sensor.
The main area of using the Steel Structure Analyzer NOVOTEST KRC-M2 – is analys the stress-strain state and residual life of pipelines, elevators, cranes and lifts, pressure vessels, steel cables of bridges also it used in engineering and metallurgical industries.
Ability to enter additional scales and additional materials for calibration
Calibration mode of basic and additional scales
Adjust the brightness of the display, audio, language selection
Ability to save backups calibrations on the internal memory of the device
Smart sensors with built-in memory of calibrations
subscribe to receive promotions and offers, and download the content
You have successfully subscribed to the newsletter
There was an error while trying to send your request. Please try again.
Thanks for your download!
SAVE CLOSE THIS MESSAGE AND CLICK THE PDF YOU WANT TO DOWNLOAD, WE ARE HAPPY TO BE ABLE TO OFFER WHAT YOU WERE LOOKING FOR